Common Problems of Grapple Reinforcement in the Extended Arm of the Log Grabber


The extended arm of the wood grabber is a machine and equipment often used in the construction industry today. Because of its high work efficiency, it is generally warmly welcomed by everyone. Among them, the grab is the key component of the extended arm of the wood grabber, which determines the wood grabber. In the successful work of the extension arm, how to make the reinforcement of the wood grabber extension arm grab more durable is a problem that everyone often thinks about.

MORE >

2021

09-15

How to clean the parts of the wood grabber? How much do you know?


Everyone knows that in the case of overhauling or maintaining the parts of the wood grabber, it is a must to carefully remove the oil stains and residues on the surface of the parts. The reason is relatively simple. Doing so will not only improve the quality of the wood grabber parts, but also More importantly, it can increase the service life of mechanical equipment.

MORE >

2021

09-15

The wood grabber manufacturer will explain to you the reasons for the abnormal noise of the engine and the solutions


The gap between the piston rod and the cylinder wall of the diesel engine of the wood grabber is too large, or the cylinder liner is installed too tightly, or the gap between the diesel engine tappet and the guide hole is too large.

MORE >

2021

09-15

How to replace the hydraulic pump bearing of the wood grabber?


The bearing for the hydraulic oil pump of the wood grabbing machine is an important component. If the bearing has a backlash, it cannot ensure all the normal clearances of the three pairs of friction pairs inside the hydraulic oil pump of the wood grabber machine, and it will also destroy the hydrostatic support of each friction pair. The oil slick on the plate is thin and thick, reducing the service life of the gear pump bearing. According to the materials provided by the hydraulic oil pump manufacturer of the wood grabber, the average service life of the bearing is 10,000h, and if it exceeds this value, it must be replaced with a new one.

MORE >

2021

09-15

The advantages of the wood grabber and the demand during the running-in period


The wood grabber has a streamlined design and is unique. The national brand diesel engine is selected, with powerful driving force, reliable in work, efficient, environmentally friendly and energy-saving. During the work, the equipment is fully automatic, and the electronic computer is used for reliability design and high work efficiency. The new sealed car cab, Grammer seat, can be equipped with heating and air conditioning, and the actual operating environment is more comfortable. It can be equipped with wooden forks, pitchforks, increased buckets, etc. to consider various working conditions

MORE >

2021

09-15

What problems should be paid attention to in the boom welding of wood grabber accessories


The small wood grabber arm is an important supporting member in the machine and equipment, and its welding quality is immediately related to the overall quality and characteristics of the excavator. The diesel engine is like the heart of the small wood grabber, so the boom is like an arm, moving The welding process of the arm means a company's technical strength and industry status. Because the small wood grabber arm must carry out a series of production and processing after welding, such as boring inner holes, milling inner holes, production and processing of mounting holes for sticks and hydraulic cylinders, and the production and processing requirements of this position are relatively high. , once there is a problem with welding, it is likely that other components cannot be installed, resulting in commodity billing and immediate property damage. Therefore, the welding process of the small excavator arm seems to be particularly important.

MORE >

2021

09-15

< 1234 >